StudentShare
Contact Us
Sign In / Sign Up for FREE
Search
Go to advanced search...
Free

Cast Iron - Essay Example

Cite this document
Summary
The paper "Cast Iron" tells us about one of the ferrous metals that have a wide range of properties produced through the process of casting. Cast iron has a crystalline structure and good compressive strength…
Download full paper File format: .doc, available for editing
GRAB THE BEST PAPER98.7% of users find it useful

Extract of sample "Cast Iron"

Running head: CAST IRON Cast Iron Name: Institution: Cast Iron Cast iron is one of the ferrous metals that have a wide range of properties produced through the process of casting. Cast iron has a crystalline structure and good compressive strength. However, it is very brittle and weak in tension. In addition, cast iron has excellent fluidity when molten, hence it is used for production of intricate shapes (Tata Steel, 2013a). Cast iron has high carbon content and its structure exhibits a rich carbon phase. Cast iron can be classified into two groups based on fracturing; white cast iron and gray cast iron. White cast iron has a white crystalline fracture surface since the fracture takes place along iron carbide plates. On the other hand, gray cast iron shows a gray surface after fracturing because the fracture takes place along the flakes or graphite plates (Key to metals, 2010). Moreover, cast iron contains more than two percent of carbon and 1-3 percent silicon, hence they are iron-carbon-silicon alloys. Therefore, the high content of silicon and carbon makes cast irons excellent casting alloys. Cast irons have low melting temperatures compared with steel, and they have relatively less reaction with molding materials. During cast iron production, it reduces in volume from the liquid state to solid thus making production of intricate castings possible. Cast iron is made by re-melting of pig iron, and possibly along with other scrap iron. The pig iron has many impurities such as iron carbide that makes the material very brittle and hard. The melting process ensures that the carbon content is between 2.4 and 4.0 percent (Tata Steel, 2013b). The production of cast iron is done through sand casting techniques although the process is enhanced by modern technology and materials. The production process often involves four stages; designing of the component to be cast, pattern making, making of mould, and casting. In the designing stage, the company provides a well detailed, complex, manufacturing drawing. The drawing shows the shape and precise dimensions of the component to be made. The next step is to make a pattern. A pattern is made using fiberglass, plastics, or wood. Patterns have the same shape and precise dimensions as the finished product because they are used to make sand moulds. A pattern can be re-used for many years to make more moulds. The pattern must give an allowance for metal shrinkage and create runners to allow the molten iron to flow into the mould. The risers are made to allow gases to escape when the molten iron is being poured. The next step is creation of a sand mould into which the molten iron will be poured. The pattern is put into the sand that is mixed with resin or clay. The pattern leaves the shape of the casting after the sand is well packed around it. Mostly, the moulds are made in two precise parts and are held in casing boxes for the pouring. When the two boxes are placed one on top of the other, a cavity into which the molten metal will flow is established. In case the casting is very large, moulds are created out of the sand on the foundry floor. The final stage involves pouring of the molten iron into the moulds. In this stage, the molten metal is at the temperatures of 1350 degrees centigrade and the process is potentially violent, hence safety is given the highest priority. First, the furnace used to melt the pig iron is loaded and the correct chemical characteristics of the iron grade needed are achieved. After the pig iron is melted, the molten iron is poured onto the moulds and it is now referred to as cast iron. The slag waste is put aside for disposal. The cast iron is given enough time to cool and then the moulds are broken out. The excess iron from the runners is cleaned through fettling process. The process involves shot blasting and grinding to attain a finished casting (Hargreaves Foundry, 2013). There are three types of cast irons; ductile, gray and white cast iron. Gray cast iron’s structure has graphite flakes. During solidification process, carbon in the iron separates to form graphite flakes, therefore properties of gray cast iron are determined by the amount, distribution and size of graphite flakes. If the molten iron has higher carbon and silicon contents and it is subjected to slower cooling rate, larger and more graphite flakes are developed. Graphite flakes makes gray cast iron to have unique properties such as excellent vibration damping, galling resistance, wear resistance, and excellent machinability. Ductile cast iron’s structure contains graphite that occurs as spheroids, unlike individual flakes in gray cast iron. Ductile cast irons are formed by adding appropriate amount of magnesium to molten metal before solidification. The added magnesium reacts with oxygen and sulfur to change the way the graphite is formed (Atlas Foundry Company, 2010). White cast iron or white iron is more brittle and harder than gray and ductile cast irons. White cast iron is formed by rapid cooling of the molten iron. After rapid cooling, carbon remains distributed all over the iron in form of cementite (Infoplease, 2013). After the final product is obtained, it is important to inspect it for any defects. Some of the most common defects in cast irons include dispersed shrinkage, flash, blow holes or pinholes, lustrous carbon, and axial shrinkage, among others. Dispersed shrinkage is characterized by cavities often perpendicular to the cast iron surface, with depths of less than 2 centimeters or 0.8 inches. This casting defect is caused by high nitrogen content or low carbon continent in the melt. Flash defects are projections that appear at the parting line when there is a clearance between two metal casting molds, hence allowing molten iron to get in and solidify. Blowholes or pinholes defect is characterized by appearance of smooth tiny holes on the surface of the cast iron. The interior walls of the pinholes are shiny, less or more oxidized compared with other regions, and they are covered with a thin graphite layer. Lustrous carbon appears as wrinkled or folded films that are distinctly outlined and occur within the walls of cat iron and causes a linear discontinuity of the structure. They are only noticeable when the cast is fractured. The defect occurs when the material from binders, core additives, or mould decompose and becomes part of the melt. Lastly, axial shrinkage defect results when metal at the central part of the casing takes more time to cool compared with the surrounding regions. This defect can be influenced by the pouring temperature and speed, alloy purity, and riser use (American Foundry Society, 2013). It is important to ensure that components with severe defects are re-melted again. Old broken cast iron scraps can be recycled to produce new items. The scrap materials can be collected from homes, garages, dustbins, old machines that have failed to operate such as lathes, finished components with defects, among others. To start with, the scrap cast iron scrap is broken down into small pieces by use of a hammer. Cast iron is very brittle and it breaks relatively easily. However, it is recommendable for the person carrying out the task to wear safety gloves, safety boots and glasses because pieces flying off can injure him or her. They are then put in a cupola furnace for re-melting. The slag is continuously removed as the melting continues to ensure the purity of the melt is attained. Then, the normal process of pouring takes place (Oliver, 2007). Metal fabrication involves building of metal structures by bending, cutting, and assembling of various parts. Cast iron is an excellent fabrication material. Cast iron can be assembled together with other parts to carry out a given function in a machine. One of the important fabrication processes is welding to assemble cast iron parts. The carbon content of carbon ranges from 2 to 4 percent, therefore it is ten times greater compared with other alloys such as steel or iron. The welding procedure can be done in two different ways; with preheat, and without preheat. Cast iron welding by preheating is done by applying heat on the whole object to be welded at temperatures ranging between 500 to 1200 degrees Celsius. The heating temperatures should not exceed 1400 degree because the metal starts melting. After the metal get hot, one should start welding by use of a low current. In addition, the weld should be minimized to approximately one inch long segment. The component must be left to cool gradually. Preheated welding is done at the normal temperature levels. Therefore, it is necessary to control the welding gun and make small welds of about one inch thick. The welds must be left to cool gradually and then pin out the extra welds deposited on the cast iron surface (The Lincoln Electric Company, 2013). Cast irons are still relevant today and have a wide range of both decorative and structural applications. This is because it is relatively cheap, easily cast into different shapes, and it is durable. The most typical uses of cast iron include; fences, firebacks and tools, piping, ordnance, decorative features, stairs, columns, balusters, historic plaques and markers, structural connectors in monuments and buildings, and hardware uses such as latches and hinges. The cast iron material used in these applications may appear to be similar, or the same, but the component composition, use, and exposure dictates the different treatments that should be used in every application (US General Services Administration, 2012). In conclusion, many people prefer to use cast iron because it is readily available and affordable. In addition it does not require complex technology to be modified to different and intricate shapes. Therefore, cast iron production process is cheaper compared to other metals such as steel. Additionally, cast iron creates a protective scale or film on its surface that makes it initially resistant to corrosion. The cast iron is prone to corrosion after being exposed on atmosphere for long, but different methods of preventing rusting such as use of paints, plating, and galvanizing can be used. References American Foundry Society (2013). Identifying Casting Defects. Retrieved from http://www.afsinc.org/content.cfm?ItemNumber=6944 Atlas Foundry Company (2010). Understanding cast iron. Retrieved from http://www.atlasfdry.com/cast-irons.htm Hargreaves Foundry (2013). Cast iron production. Retrieved from http://www.hargreavesfoundry.co.uk/userfiles/file/downloads/foundry/castironproduction.pdf Infoplease (2013). Iron. Retrieved from http://www.infoplease.com/encyclopedia/science/iron-production-refining.html Key to metals (2010). Classification of cast iron. Retrieved from http://www.keytometals.com/Articles/Art63.htm Oliver, L. (2007). Scrap iron recycling at the Lab. Retrieved from http://www.backyardmetalcasting.com/scrapiron02.html Tata Steel 2013. The properties of cast iron, wrought iron and steel. Retrieved from http://www.tatasteelconstruction.com/en/reference/teaching_resources/architectural_studio_reference/history/the_technology_of_iron_and_steel/the_properties_of_cast_iron,_wrought_iron_and_steel/ Tata Steel (2013b). Definitions of what is meant by cast iron, wrought iron and steel. Retrieved From http://www.tatasteelconstruction.com/en/reference/teaching_resources/architectural_studio_reference/history/the_technology_of_iron_and_steel/definitions_of_cast_iron,_wrought_iron_and_steel/ The Lincoln Electric Company (2013). Guidelines for welding cast iron. Retrieved from http://www.lincolnelectric.com/en-us/support/welding-how-to/Pages/welding-cast-iron-detail.aspx US General Services Administration (2012). Cast Iron:  Characteristics, Uses and Problems. Retrieved from http://www.gsa.gov/portal/content/111738 Read More
Cite this document
  • APA
  • MLA
  • CHICAGO
(Cast Iron Still Relevant Today Example | Topics and Well Written Essays - 1806 words, n.d.)
Cast Iron Still Relevant Today Example | Topics and Well Written Essays - 1806 words. https://studentshare.org/engineering-and-construction/2050817-cast-iron-still-relevant-today
(Cast Iron Still Relevant Today Example | Topics and Well Written Essays - 1806 Words)
Cast Iron Still Relevant Today Example | Topics and Well Written Essays - 1806 Words. https://studentshare.org/engineering-and-construction/2050817-cast-iron-still-relevant-today.
“Cast Iron Still Relevant Today Example | Topics and Well Written Essays - 1806 Words”. https://studentshare.org/engineering-and-construction/2050817-cast-iron-still-relevant-today.
  • Cited: 0 times

CHECK THESE SAMPLES OF Cast Iron

The Scale of Hardness by Rockwell Scale

The key objectives of this experiment are; to establish the hardness measurements of aluminum, brass, steel, and iron, and to compare and contrast the hardness of aluminum, brass, 1018 steel, and Cast Iron.... Cast Iron was found to have a higher hardness value than the other metals.... From the results, it is evidenced that Cast Iron was the hardest material followed by 1018 steel, brass and lastly aluminum.... The hardness of Cast Iron was close to that of 1018 steel....
5 Pages (1250 words) Lab Report

Advanced Materials and Manufacture, Microstructures and Properties of Cast Iron

The paper "Advanced Materials and Manufacture, Microstructures and Properties of Cast Iron" highlights that in certain forms of engines, the master connecting rods are applied instead of the simple type.... These connecting rods are also produced using titanium and Cast Iron.... Cast Iron is normally utilized in applications like motor scooters.... Connecting rods of mostly racing engines are referred to as billet rods, this is because they are made from solid metal billet, and not cast metal or forged metal (White, 2002)....
16 Pages (4000 words) Case Study

The Production of Cast Iron

The paper "The Production of Cast Iron" is an excellent example of an essay on chemistry.... The paper "The Production of Cast Iron" is an excellent example of an essay on chemistry.... The paper "The Production of Cast Iron" is an excellent example of an essay on chemistry.... If an iron-carbon alloy containing over 2% carbon is cooled very slowly it will result in graphite, which is pure carbon, and iron crystallizing out, to form Cast Iron....
5 Pages (1250 words) Essay

The Use of Cast Iron in Engineering and Good Machining Qualities

The paper "The Use of Cast Iron in Engineering and Good Machining Qualities" discusses high quality Cast Iron.... It can be concluded that Cast Iron is relevant today and is of great importance, especially in the engineering field.... Cast Iron is suitable for developing ornamental designs on different structures because of its malleability.... Cast Iron is also used to insulate electric cables in different structures to enhance safety....
6 Pages (1500 words) Essay

The Relevance of Cast Iron

From the paper "The Relevance of Cast Iron" it is clear that iron is referred to as any ancient metal that has not stopped it from competing effectively with other materials of the same standard.... Cast Iron has now been found to compete effectively with other low-cost steel materials such as steel due to achievable machining speed of up to 400m2 through the application of the normal carbide tools.... Cast Iron has been featured prominently in structural and mechanical work since the middle ages....
6 Pages (1500 words) Report

Automotive Engine Blocks

The popular materials used for making automotive engine blocks include grey Cast Iron, graphite iron, and aluminum.... The earliest engine blocks were made from Cast Iron, but there is some evidence illustrating that one person, Charlie developed a cylinder block from aluminum in 1903.... The most used material for making engine blocks is grey Cast Iron and alloys.... Grey Cast Iron is very heavy and in early times made vehicles to be very heavy....
20 Pages (5000 words) Research Paper

Properties of Grey Cast Iron and Why It Is Used in Making Disc Brake

This coursework "Properties of Grey Cast Iron and Why It Is Used in Making Disc Brake" focuses on the role of the brake disc that is to react with the brake pads in order to convert, by means of friction, the kinetic energy of motion into thermal energy or heat.... The grey Cast Iron has good thermal conductivity and diffusibility characteristics.... The thermal conductivity of grey Cast Iron is however varied depending on its grade.... The grey Cast Iron material is resistant to distortion and cracking which plays an important role in enabling it to be used effectively for the disc brake....
5 Pages (1250 words) Coursework

Cast Iron Relevance

According to research findings of the paper 'Cast Iron Relevance', Cast Iron is still used for a number of applications, including the manufacture of automotive parts, pipes, home items, and building constructions.... Cast Iron is a metal alloy that contains iron, and often, silicon and carbon.... The iron used to make Cast Iron is mainly the pig iron.... Cast Iron exhibit different colours when it breaks depending on the constituents or impurities in it....
5 Pages (1250 words) Coursework
sponsored ads
We use cookies to create the best experience for you. Keep on browsing if you are OK with that, or find out how to manage cookies.
Contact Us